Top 9 Temp and Humidity Controller – Home & Kitchen

As an Amazon Associate I earn from qualifying purchases.

1. Inkbird

#ad

Inkbird Dual Stage Humidity Controller 10A 110VAC 1100W IHC-200 Digital Pre-Wired Outlet for Mushroom Ventilator Fan Crawl Space Tobacco Cage

#ad
Inkbird #ad - Humidity control range 5~99. 99%rh; control accuracy: ±3%rH. Application widely used with mushroom, ventilator fan, seed germination, crawl space, mini greenhouse, turtle enclosure, curing chamber, etc.

Refresh rate: 05s. And you can install it on the wall. Power supply: 10a 110V 1100W. Multiple protection alarm when humidity exceeds high/low humidity setting value; Alarm when sensor error or humidity exceeds limit. Delay protection for output. Two modes dual outlet, you can switch different modes between humidification and dehumidification automatically. Simple and convenient designedplug and play, dual LED screens enabling more humanized 3 buttons for easy use.
BrandInkbird #ad
ManufacturerInkbird #ad
Part NumberIHC-200
ModelIHC-200

2. AC Infinity

#ad

Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics, AC Infinity CLOUDLINE T6, Quiet 6” Inline Duct Fan with Temperature Humidity Controller

#ad
AC Infinity #ad - Intelligent controller with temperature and humidity programming, timer, fan speed control, and alarm system. Airflow: 402 cfm | noise: 32 dBA | Bearings: Dual Ball. Kit also includes corded sensor probe, two duct clamps, AC power plug, and required mounting hardware. Duct size: 6” | dimensions: 7. 9 x 12. 6 x 8. 4 in. Designed to ventilate hydroponic grow rooms, cool AV closets, transfer heating/cooling, and exhaust odors. Mixed flow design combined with a PWM-controlled EC-motor for a truly quiet and energy efficient performance.
BrandAC Infinity #ad
Part NumberAI-CLT6
ModelAI-CLT6

3. AC Infinity

#ad

Ventilation Exhaust Fan for Heating Cooling Booster, AC Infinity CLOUDLINE T4, Hydroponics, Grow Tents, Quiet 4” Inline Duct Fan with Temperature Humidity Controller

#ad
AC Infinity #ad - Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system. Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware. Duct size: 4” | dimensions: 6. 9 x 11. 9 x 7. 4 in. Airflow: 205 cfm | noise: 28 dBA | Bearings: Dual Ball. Mixed flow design combined with a PWM-controlled DC or EC-motor for a truly quiet and energy efficient performance.
BrandAC Infinity #ad
ManufacturerAC Infinity #ad
Part NumberAI-CLT4
ModelAI-CLT4

4. Niwa

#ad

Niwa Grow Hub, Automated Hydroponic System and VPD Controller. Temperature, Light and Watering Automation & Monitoring with Grow Room Sensors, Humidity, Wi-Fi and App. Not Compatible with 5G Wi-Fi

#ad
Niwa #ad - If you measure it, it will improve! No subscription fees! It needs to be connected to a 2. 4g wi-fi, it is not compatible with 5G Wi-Fi routers. Vpd, cooler, humidifier, Humidity and light sensors included.

Max resistive load 10a per individual grow Hub Outlet; 15A TOTAL for entire Grow Hub, please read the manual. Usa standard plug and outlets. Automate your lamp, Temperature, Heater, Pump, Dehumidifier or Fan. Monitor and control any grow tent with the niwa app from anywhere. Ideal for grow tents, not for commercial use. Acces live and historical data from anywhere with the niwa app ios & android.

Create your own custom recipes and set the perfect VPD, Temperature, Humidity, Light and Water Schedules for your Plants to Create the Perfect Environment for your Plants.2. 4 ghz wi-fi only; outlets can’t be manually operated. Customize your alarms for your Different Grow Hubs and get Notified Anytime Something Goes Wrong.
BrandNiwa #ad
ManufacturerNiwa #ad
Height1.75 Inches
Length11.75 Inches
Weight1.7 Pounds
Width2.25 Inches
Part Number8-60186-00099-3
WarrantyNiwa warrants the original purchase of this product against defects in material and workmanship under normal use for one (1) year from the date of purchase. This warranty shall not apply to this product or any part thereof which had been damaged by accident, abuse, misuse, modification, negligence, alteration or misapplication. This determination will be decided upon after a product review has been executed by a Niwa representative. This warranty shall apply only to the United States, including Alaska, Hawaii and territories of the United States and Canada. Defective devices need to be returned with a “proof of purchase” receipt. For additional warranty information, contact the Niwa support team at [email protected] Our normal business hours are Monday – Friday, 9 a.m. to 4 p.m. Eastern Standard Time. We are closed for most major holidays. Monetary refunds of the warranty will not be given. All warranty service is provided through the factory or an authorized retail partner.

5. PullyBuy

#ad

Ventilation Exhaust Fan Using for Heating Cooling Booster, Home use Ventilation and Exhaust Blower., Hydroponics, Grow Tents, PullyBuy 6” Quiet Inline Duct Fan with Temperature Humidity Controller

#ad
PullyBuy #ad - Smart programming:intelligent controller with temperature and humidity programming, timer, fan speed control, and alarm system. The controller has precise temperature and humidity sensors on a 12-foot wired probe. This can make the in-line fan run more quietly and reach low speed without generating noise or heat.

The energy efficiency of the ec motor is also To be twice as high, and can save up to 40% of energy costs, and can recover the cost in the long run. Package details: quiet 6” inline duct Fan, AC power plug, smart programmer, wired sensor probe, two conduit clamps and required installation hardware. Our inline blowers can also create negative pressure environments, exhaust odors and smoke as well as intake fresh air from outdoors. Pullybuy 6” inline duct fan are used in indoor grow facilities and vertical farms, heating and cooling transfer, simulate wind, commercial drying and air filtration applications.2

2 year Warranty. Quiet and energy saving performance is very good:the mixed flow design and the pwm controlled ec motor can be controlled using precise electronic pulses and intelligent programming. Duct diameter: 6”150mm — airflow: 370-402 cfm —power 50w —input voltage:ac110~220v, 50/60hz —speed:2500rpm/min —noise: 32 dba —pressure: 502 Pa — Bearings: Dual Ball —Size: 12. 48x8. 03x9 in.
BrandPullyBuy #ad

6. AutoPilot

#ad

White, AutoPilot APE4100 Eclipse F60 Digital Environmental Controller

#ad
AutoPilot #ad - Cycle timer is programmable down to 1 second. Separate day/night temperature and humidity set points. 4 outlets control temperature heating & cooling, humidity and a cycle timed device. Operates temperature and humidity outlets independently or synchronized. Cycle timer outlet modes: day only/night only/24 hours.
BrandAutoPilot #ad
ManufacturerAutopilot #ad
Height6 Inches
Length10.5 Inches
Width10.4 Inches
Part NumberAPE4100
ModelAPE4100
Warranty1 year warranty

7. AC Infinity

#ad

Quiet 8” Inline Duct Fan with Temperature Humidity Controller, Ventilation Exhaust Fan for Heating Cooling Booster, AC Infinity CLOUDLINE T8, Grow Tents, Hydroponics

#ad
AC Infinity #ad - Airflow: 807 cfm | noise: 39 dBA | Bearings: Dual Ball. Duct size: 8” | dimensions: 8. 5 x 11. 9 x 9. 2 in. Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system. Designed to ventilate hydroponic grow rooms, cool AV closets, transfer heating/cooling, and exhaust odors. Mixed flow design combined with a PWM-controlled EC-motor for a truly quiet and energy efficient performance. Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware.
BrandAC Infinity #ad
ManufacturerAC Infinity #ad
Height9.2 Inches
Length8.5 Inches
Width11.9 Inches
Part NumberAI-CLT8
ModelCLOUDLINE T8

8. MARS HYDRO

#ad

6" Inline Fan with Temperature Humidity Controller, 6 Inch Carbon Filter, 3 Duct Clamps Ventilation System Grow Tent Exhaust Fan Kit, 33 Feet Ducting, MARS HYDRO 6" Inline Fan Carbon Filter Combo

#ad
MARS HYDRO #ad - Low noise level: 6 inch inline fan extremely low noise32 dB. Package include: 6" inline duct fan with Temperature Humidity Controller, 6"carbon filter, 33ft length flex ducting, 3 Duct Clamps.

Moves air through your target location efficiently for optimal ventilation. Powerful motor is a more energy efficient and quieter operation. Superior carbon: made of imported Virgin Australian activated charcoal, delivering filtered airflow. Effective & quiet ventlation kit: 6" inline duct fan is rated for max 350CFM with Intelligent Temperature Humidity Controller programming, timer, fan speed control, and alarm system. Perfect growth partner: fast assembly, work as a cost-effective, convenient ventilation combo. Satisfaction guarantee: any problems will be responded in 24 hours.
BrandMARS HYDRO #ad
ManufacturerMARS HYDRO #ad
Height4 Inches
Length11 Inches
Weight14 Pounds
Width8 Inches

9. BN-LINK

#ad

8.3A 1000W ETL Listed, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination

#ad
BN-LINK #ad - Ease of mind: handy led heating and power indicator lights allow you to see the controller’s status even in total darkness. Effortless heating setup: simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting.

Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature. Safe & reliable: our thermostat controller is etl listed, and rigorously tested for quality control and safety. Do not immerse controller or probe into water. Conforms to ul std no. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.

Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rugged construction: the cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine. Variety of uses: our thermostat controller can be used for seedling germination, heating, rooting, fermentation, brewing, and more, keeping your various environments in their ideal temperature range. Rated voltage is 120vac 60Hz, Max Loading: 8. 3a 1000w.
BrandBN-LINK #ad
ManufacturerBN-LINK #ad
Height1.6 Inches
Length4.5 Inches
Weight1.14 Pounds
Width3.5 Inches
Part NumberFBA_BNQ-T7H
ModelT7(H)