12V/24V/36V/48V Auto, Negative Ground MAX 200V 6000W Input Fit Lithium AGM Gel Flooded User Blacklight LCD Display Large-AmpTracer 8420ANUpgraded Version, EPEVER MPPT Charge Controller 80 amp#adEPEVER #ad - Real-time energy recording and statistical. Upgraded version ce, rohs, sgs certificate negative ground tracer an series mppt controller max input current: 80 amp; max input solar power: 1500w12v; 3000w24v; 4500w36v; 6000w/48v; max input voltage: 200V; with tracking efficiency no less than 99.
5% msrt and 12v/24v/36v/48v auto identifying system voltage. Common negatIVE Ground. Led troubleshooting indicators and lcd display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters. It protect the battery from being over-charged by the solar modules and over-discharged by the loads.
Real-time energy recording and statistical. When the input power exceeds a certain level and the charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level. 4 type load timer:on/off mode, PV voltage control mode, Sealed, Dual Time control mode. Accurately recognizing and tracking of multiple power point to ensure DC/DC transfer efficiency is up to 98.
|Part Number||EPever 8420AN|
|Warranty||Manufacturer warranty for 30days from date of purchase|
EPEVER 50A MPPT Solar Charge Controller 12V/24V/36V/48V Auto Max.PV 150V Input Negative Ground Solar Panel Charge Regulator with MT50 Remote Meter Temperature Sensor RTS & PC Communication Cable RS485#adEPEVER #ad - Auto control system to limit the charging power & current go over the rated value. Dual rs485 port rj45 connector, e. G. Mppt solar charge controller advanced mppt technology & ultra-fast tracking speed, with tracking efficiency no less than 99. 5%. Standard modbus communication protocol with RS485 interface, to monitor or set the parameters by using the phone Apps, MT50 Meter and PC software.
Wide range of maximum power point operating voltage, rated charging power & charging current double automatic limiting function.
Support 4 charging options: Sealed, Gel, improved photovoltaic module utilization, Flooded and User. With the adaptive three-stage charging mode based on digital control circuit, Tracer AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. High quality & low failure rate components of ST and Infineon to ensure the product's life.
EPEVER 60amp MPPT Charge Controller 48V/36V/24V/12V Negative Ground Max 150V 4500W Input fit Litium/AGM/Gel/Flooded/User Backlight LCD Display Large-Amp60A-MPPT#adEPEVER #ad - Battery temperature compensation function to ensure the controller’s life. The pv input voltage must be at least 2V greater than the battery voltage to charge.
Max input current: 60 amp; rate input solar power: 780w12v; 1560w24v; 2340w36v; 3120w48vthe maximum input power must not exceed 1. 5 times the rated power ; max input Voltage: 150V; Auto control system to limit the charging power & current go over the rated value.
|Part Number||EPever 6415AN|
|Warranty||Manufacturer warranty for 30days from date of purchase|
EPEVER 60A MPPT Solar Charge Controller 12V/24V/36V/48V DC Automatically Identifying System Voltage Max.PV 150V Solar Panel Regulator Tracer 6415 an#adEPEVER #ad - High quality & low failure rate components of ST and Infineon to ensure the product's life. It have battery temperature compensation function, automatic over-temperature power reduction function. All-around electronic protections, over discharging, including overcharging, real-time energy recording and statistical function, and PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for a longer service time.
The load, utility or generator auto-control relays make it easy to compose the hybrid power system.
Mppt solar charge controller advanced mppt technology & ultra-fast tracking speed, with tracking efficiency no less than 99. 5%. Hundred percent full load operation in working environment temperature range within charging & discharging. The isolated rs485 interface with standard modbus communication protocol and 5v power supply makes it easy for customer to expand the application, e. G.
EPEVER MPPT Charge Controller 40A 12/24/36/48V Auto Solar Panels Max PV 150V Common Negative Ground Solar Regulator LCD Display for Gel Sealed Flooded Lithium Type XTRA4415N#adEPEVER #ad - Maximizing the energy From Solar Panels to Charge your battery for off-grid photovoltaic systems. 7 battery type selection sealedagm, absorption, liniCoMnO2 Lithium, lead-acid user, float, Lithium User9~34V. Newest release epever mppt solar charge controller 40a xtra4415n-xds2, 12v/24v/36v/48v auto, max pv 150v, common negative grounding, advanced MPPT Technology with High Tracking Efficiency up to 99.
5% and peak conversion Efficiency of 98%. Real-time energy statistic function, over-discharging, overload, overcharging, short-circuiting, View/modify working parameters via MT50 or APP or PC software via RS485 interface.
Four stages of chargingbulk, flooded, Gel, LiFePO4 Lithium, Equalization and all-around electronic protection prolong the lifecycle of batteries. Max pv input power 520w charge for 12v battery system, e. G. Street lighting systems and field monitoring, household systems, or 1040W charge for 24V battery system, or 1560W charge for 36V battery system, or 2080W charge for 48V battery system . Common negative grouding designed of this 40Amp mppt controller can be widely used for different applications, communication base stations, RV solar system etc.
60 amp Solar Controller MPPT Negative Ground Max 150V Input fit for Litium Sealed AGM Gel Flooded User BatteryUpgraded, EPEVER 60A MPPT Charge Controller 48V 36V 24V 12V Auto#adEPEVER #ad - Auto control system to limit the charging power & current go over the rated value. Rs-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations.
Battery temperature compensation function to ensure the controller’s life. The stocks starting from august 2020 are all upgraded versions that support lithium batteries. Please always connect the battery before connect the solar panel.
EPEVER 100 Amp MPPT Solar Charge Controller 200V PV Input Negative Ground Work with 12/24/36/48V Battery System Tracer 10420AN Series W/ MT50 Remote Meter#adSolarEpic #ad - Negative ground 200v pv input, compatible with 12/24/36/48v batteries lead Acid Charging. Lithium battery :liFePO4/ LiNiCoMnO2. Support 4 charging options: sealed, Flooded and User define, Gel, Battery temperature compensation will make the charging progress efficiently.
Dual rs485 port rj45 connector, it can be paralleled up to 8 units together linked by 8pin ethernet cable to make the data monitoring easy and accurate.
|Warranty||3 Years Warranty|
EPEVER Mppt Solar Charge Controller 80a 12v/24v/36v/48v Auto Max 200V 6000W Inpot Power fit for Sealed/Gel/FloodedTracer 8420AN#adEPEVER #ad - Tracer an series, negative ground design controller; 12V/24V/36V/48V Auto identifying system voltage, 80 amp mppt controller. Rs-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations.
|Part Number||Tracer 8420AN|
|Warranty||Manufacture warranty for 18 months from date of purchase.|
EPEVER 50A MPPT Solar Charge Controller 12/24/36/48VDC Automatically Identifying System Voltage with MT50 Remote Meter & Temperature Sensor RTS & Communication Cable RS485#adEPEVER #ad - Maximum pv open circuit voltage 150V. The remote temperature sensor RTS and the voltage sensor design will collect accurate data of battery temperature and voltage. The isolated rs485 interface with standard MODBUS communication protocol and 5V power supply makes it easy for customer to expand the application.
Tracer5415an mppt charge controller automatically identifying 12/24/36/48vdc system voltage.
Common negative ground design. Maximum pv input power 625w/12v 1250w/24v 1875W/36V 2500W/48V. Tracer-an series controller, based on multiphase synchronous rectification technology MSRT and advanced MPPT control algorithm, has the features of high response speed, with dual-core processor architecture and common negative design, high reliability and high industrial standard.
EPEVER 40A MPPT Solar Charge Controller 12V 24V Auto, Lithium Batteries and Load Timer Setting, 520W/1040W for Lead-Acid, 40 amp Negative Grounded Solar Charge Controller MPPT Max Input 100V#adEPEVER #ad - Auto identifying 12V/24V DCsystem voltage. Also compatible with various Deep Cycle battery options: Sealed,. 40a solar charge controller charging process has been optimized for long battery life and improved system performance. It includes a 4-stage battery charging Bulk, Float, Boost, and Equalization and temperature compensation increase your battery life and improve your system's performance.
Mppt controller 40a with blackligh LCD screen for displaing system information and working condition.
5% and peak conversion efficiency of 98%. Multiple load control method, APP and MT-50 Mppt charge controller protection built-in against reverse polarity, overcharging, short-circuiting, overload, over-discharging, and reverse current. It protect the battery from being over-charged by the solar modules and over-discharged by the loads. Die-cast aluminum design allows for efficient heat dissipation.