Gel, Renogy Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display, Compatible with Sealed, Flooded and Lithium Batteries#adRenogy #ad - Compatible with 12v and 24v system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready. 5v 2. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding.
Backlit lcd screen for displaying operating information and error codes. Designed to cleanly flush mount on walls, providing a sleek, integrated look. Rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy DC Home smartphone app.
Smart 4 stage pwm charging bulk, overcharging, boost, Float and Equalization and temperature compensation increases battery life and improves system performance.4a usb port on the front display can be used to charge mobile phones, tablets, speakers, etc. An included surface Mount Attachment allows for versatility in mounting. Intelligent protection against: reverse polarity, short-circuit and reverse current.
|Model||Adventurer 30A Li 12V/24V|
|Warranty||NEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.|
Renogy Battery Temperature Sensor Solar, 118 0.03 Compatible Adventurer/Rover Charge Controllers#adRenogy #ad - Non-polarized wires are insulated and protected from harsh environments. Rohs compliance and rated for outdoor use. Wide temperature Compensation Range up to 176℉. Compatible with renogy adventurer, Wanderer, Voyager, Rover and Rover Elite series controllers. Cable length: 118 in.
|Part Number||Battery Temperature Sensor|
|Model||Battery Temperature Sensor|
EpRec PWM 40A 12V/24V Solar Charge Controller, Model:Adventurer RBL Blue, Solar Panel Charge Controller with USB Port LCD Display#adEpRec #ad - Only suitable for small home solar system, once the voltage of the battery drop below 9V,. Charge controller easy to install and operate: Please always connect the battery before connect the solar panel, only suitable for small home solar system.
Three load work mode settable, 1-15hand 0hboth belong to the light control mode, and the load will turned off at dawn. 40a solar charge controller 12v / 24v auto work; max input voltage: 40v; max pV power 400W /in 12V, 900W / in 24V.
24hload output 24 hours except for battery under voltage 1-15HLoad on after sunset and closed after setting hours turn off load after dawn 0HDusk to dawn the load will turned off at dawn. Solar charge controller 20 amps only suitable for lead acid batteries: OPEN, Liions, not for nickel hydride, AGM, GEL and Seal, lithium, or other batteries.
Model:Adventurer RBL Blue, Solar Panel Charge Controller with USB Port LCD Display, EpRec PWM 60A 12V/24V Solar Charge Controller#adEpRec #ad - 12 months honor warranty from eprec and 24hrs after service. Backlight lcd display pv/ battery/ load charge and discharge parameter. Notes: for any reason you are unsatisfied with our product, just feel free to contact support for exchange or refund.
More safe using for home, industrial, commercial etc. Add feature: charge and Discharge Current, Charge and Discharge energy recording function. Pwm charge controller protection - dual mosfet reverse current/ over heat /Under-voltage discharge discharge / open-circuit / short-circuit / over-load/ over-charging protection.
Load should be DC. This solar charge controller fit for lead-acid batteries open, AGM, once the voltage of the battery drop below 8V, GEL with mutiple load timer. Fully 4-stage pwm charge boost, equalization, 12v780w / 24v1560W input, ABS, Float, Dual USB can give your electronic product max 5V 2A. For protecting the lifespan of your battery, the solar controller will turn off automatically.
Renogy Rover 30 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery#adRenogy #ad - Charges over-discharged Lithium-Ion batteries. Die-cast aluminum design for heat dissipation and the capability of measuring the battery's temperature and remote monitoring. Conversion efficiency of 98%.
Compatible with various deep cycle battery options: sealed, and short circuit. Error code detection for easy self diagnoses. Electronic protection: overcharging, Float, Flooded, and equalization and LCD screen with programmable charging parameters.
Automatically detect 12v or 24v dc system voltages innovative mppt technology with High tracking efficiency up to 99% and peak. 4-stage charging: bulk, over-discharging, gel, overload, and lithium. Rs232 port allows the rover to communicate with the bt-1 Bluetooth module, which can pair with the Renogy DC Home Smart phone app. Customizable charging voltages.
|Part Number||fit for Gel Sealed Flooded and Lithium|
|Model||fit for Gel Sealed Flooded and Lithium|
|Warranty||2-year material and workmanship warranty|
Boat, Renogy 300 Watts 12 Volts Monocrystalline Solar RV Kit with 30A PWM LCD Charge Controller/Solar Panel Connectors/Tray Cable/Corner Bracket Mount/Cable Entry housing for RV#adRenogy #ad - Designed for off-grid solar panel system, caravan, RV, boat, Green house solar panel system. Monocrystalline solar cell efficiency: 21%. This kit includes our adventurer 30A PWM Flush Mount Charge Controller can charge the battery quickly and safely under almost any condition.
Power source type: Solar Powered. Corrosionresistant aluminum frame for extended outdoor use, allowing the panels to last for decades as well as withstand high winds 2400Pa and snow loads 5400Pa.
|Model||300 Watts 12 Volts Monocrystalline Solar|
|Warranty||f gifted or resold the customer must go through the original Purchaser in order to claim warranty. Original order information is needed to claim warranty.If original order was shipped within the US, the Purchaser will be responsible for additional shipping costs out of the US.The Customer’s sole and exclusive remedy and the entire liability of the Warrantor, its suppliers and affiliates for breach of the warranty is, either to replace the PV module(s)or component partsof the PV module(s) and in some cases refund the PV module(s) cost. This warranty does not cover labor.PV modulesor components that have been serviced or replaced under their warranty period do not receive extended warranties. Instead, the serviced/replaced PV module(s)will abide to the original warranty period issued when first purchased. No employee, agent, dealer or any other person is authorized to give any warranties on behalf of the Warrantor, not expressly set forth in this limited warranty.|
BT-1 RS232, Renogy Bluetooth Module RJ12 Communication Port Compatible Rover/Wanderer/Adventurer Charge Controllers#adRenogy #ad - Embedded exclusive Bluetooth chip with high efficiency and low energy consumption. Power source type: Solar Powered. 2 and ble technology provides fast and uninterrupted communication. Powered directly through rj12 communication port; Signal range up to 82ft; Two LED lights indicate the power and Bluetooth connection condition.
|Part Number||BT-1 Bluetooth Module|
|Warranty||1-year material and workmanship warranty|
Renogy 100 Watt 12 Volt Extremely Flexible Monocrystalline Solar Panel & Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display#adRenogy #ad - Product 2: smart 4 stage pwm charging bulk, overcharging, boost, Float and Equalization and temperature compensation increases battery life and improves system performance. The lightweight design also contributes to lower mpg on vehicles. Product 2: the adventurer is a negative ground controller. Intelligent protection against: reverse polarity, short-circuit and reverse current.
Product 1: with a flex range of up to 248 degrees, this panel is capable of meeting a wide range of applications where standard panels can be inconvenient to mount, such as on the curved roof of an airstream. Product 2: compatible with 12v and 24V system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready.
Etfe material also has antifouling and self-cleaning abilities, ensure best performance day after day. Product 1: thanks to advanced polymer materials, this product weighs 70% less than conventional solar panels, making transportation and installation a breeze. 5v 2. 4a usb port on the front display can be used to charge mobile phones, speakers, tablets, etc. Product 1: sleek and barely noticeable, the renogy 100W flexible solar panel laid flat is only a tenth of an inch tall! Approximately 95% thinner than its rigid counterpart, this panel is ideal for a stealthy solar setup.
& Flooded Batteries & Bluetooth Module, Renogy Rover 30 Amp 12V/24V MPPT Solar Charge Controller Battery Regulator Compatible with Lithium Sealed, Grey, Gel#adRenogy #ad - Aluminum heat sink allows for efficient heat dissipation. Compatible with 12v and 24v systems. Positive ground controller featuring innovative mppt maximum power point tracking technology with high tracking efficiency up to 99%, maximizing the energy from solar panels to charge your system.
Rs232 port allows the rover pg to communicate with the BT-1 Bluetooth module, which can pair with the RenogyDC Home smartphone app.
8v lfp. Lcd screen and multiple led indicators for displaying system operation information, customizable parameters, and error codes. 4-stage charging bulk, boost, Float, and Equalization and temperature compensation increase your battery life and improve your system's performance. Power source type: Solar-Powered.
|Model||Rover 30 Amp 12V/24V|
GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Intelligent Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation#adGHB #ad - Pay special attention to + - polarity to avoid reversed connection, otherwise, your load may be damaged. Power-efficient >> microcontroller digital accuracy, the arrow between the panel icon and the battery icon will flashe fastly, it will be slow flashed, will stop charging, when it's charging, when the battery was a full charge, the function of the controller is to protect the voltage overshoot and discharge.
A key to open and close the load. Lcd screen display >> this solar panel charger controller with lcd to display all parameters, the users can intuitively know the working condition of the controller.
Kindly suggest to use standard 11-15 AWG wire to connect with terminals perfectly. The lcd display is with built-in energy-saving backlight LCD, display better, the LCD has rich contents, more clear, more beautiful, more modern and more power-efficient. Rated discharge current >> 20a; usb output voltage: 5v; total usb output current: 3a; dc output voltage: 12v. Available for DC lamp and phone charging.