As an Amazon Associate I earn from qualifying purchases.
YELUN #ad - Sturdy material: these hose connectors are made of 58-3 brass, which is rustproof, corrosion resistance and durable, and the stainless steel hoop clamp can avoid garden hose leakage.
The product contains 3 pc male + 3 pc female garden hose repair kit, 6 pcs stainless tightening clamp， with 6 pcs free rubber gaskets. Note:1. Keep the water pipe incision flat.
PLG #ad - Package included 2 set/4pcs male and female hose connector and clamps. Can be used as hose repair, hose end connect and hose mender. Be very careful as both the hose and the coupler will be too hot to touch.
Warm tip: the brass hose connector od is 19mm, some hoses will have a really snug fit and some others will be really hard to attach the coupler. If your garden hose id is 5/8-inch16mm, One easy way is to soak the end of the hose with boiling water.
MaoFa #ad - Pipe joint diameter is 19mm/074”, standard 3/4" is about 19. 1mm, our product is a little smaller than stand size which make it easy to insert or pull out 3/4” hose.
With the stainless tightening clamp you can make it tightly as you want. Heavy-duty brass construction with rust proof. Standard 3/4" us thread garden hose connection, work with your gaden hose, sprayers, nozzle, etc.
Hotop #ad - What you get: you will get 4 pieces 3/4 inch brass garden water hose mender connector with 8 pieces of stainless steel clamp, and 1 roll of seal tape in 1 package, the tape measures about 472 inch/ 12 m long and 055 inch/ 14 mm wide, enough quantity for daily use. 071 inch/ 18 mm in diameter, suitable for most standard 3/4 inch/ 1.
9 cm garden hose, please do pay attention to the size carefully before purchasing to make sure it's the right fitting for your hose. Easy installation: just install the hose end repair connector by hands without any tool, saving your time and energy; The tape is less sticky on the fingers and easy to remove, no more complicate process, just wrap the seal tape around the threaded male end of the pipe or connector and screw it in.
Durable and sturdy: this garden hose repair connector is made of solid brass, corrosion resistance, durable to use with firm structure; The seal tape is made of teflon with nice sealing, both are rust and corrode resistant, the clamp is made of stainless steel, anti-aging. For 3/4 inch garden hose: the solid brass water hose mender is approx.
Hotop #ad - Please check the size: each coupling splicer connector measures approx. 18. 7 mm/ 073 inch in diameter and the hose repair connector is 19 mm/074 inch in diameter, it supports for 3/4 inch standard hose; It's also easy and convenient to insert and remove, help you to deal with much leaking problems.
Install easily: our female male hose connectors, clamps and tapes are easy for you to install and operate, you can directly install them by hands, without any other complex tools; The practical clamps can help protect the pipe from leaking.
Wide range to use: these 3/4 inch solid brass garden hose mender can be applied for most standard garden hose, as long as the size is fitting, faucets and watering devices, our hose mender tool sets will be your useful assistants when you repairing the broken pipe. Durable and sturdy: our water hose repair kits are made of solid brass, durable and not easy to rust, with firm structure, serving for a long time; The clamp is made of stainless steel, also not easy to break, giving you nice use process.
PLG #ad - Size: hose joint diameter is 19mm/074", work with 3/4" garden hose diameter is about 19. 1mm. Female connector diamteter is 1"/25. 4mm. Material:solid brass body and stainless steel clamps with rust proof, Heavy duty.
Package included 1 set/2pcs male and female hose connector and clamps. Can be used as hose repair, hose end connect and hose mender. Warm tip: the brass hose connector od is 19mm, some hoses will have a really snug fit and some others will be really hard to attach the coupler.
Hotop #ad - Sturdy material: these hose connectors are made of solid brass, corrosion resistance and durable, which is rustproof, and the stainless steel hoop clamp can avoid garden hose leakage. Easy to use: replacing the end of the garden hose is quick and easy, just by hand, pipe tubing, no additional tools are required, hose repair mender, suitable for using with garden hose, and water equipment system, etc.
17 mm/ 067 inches, can easy to connect the 3/4 inch hose for easily insert and remove hoses, please check your hose size before buy it. Size details: the diameter of brass garden hose mender is approx. Wide applications: you can use them to repair or replace broken female or male hose connector, connect to male or female quick connector to lengthen the hose, use with water faucet, etc.
Sanpaint #ad - Easy to use and reliable, Work perfectly with any standard garden hose. End female hose connector/Replacement/Mender For 5/8 inch or 3/4 inch hoses. Package include:1 pack hose Connector Kit 1 female coupling + 1 clamp + 2 screws.
STYDDI #ad - They are ready for immediate use and reusable for future use. The clamps which work perfectly together with the connectors are made of 304 stainless steel with the advantage of high quality and corrosion-resistant. Easy to install when connecting or repairing hose - this hose repair kit contains all you need to connect a hose or repair a hose.
All the products included in this kit is reusable - this hose repair kit includes 4 solid brass Female connectors, 4 solid brass Male connectors, 8 stainless steel clamps and 8 gaskets. They are easy to connect and disconnect, and they could hold up for a long time. This kit could definitely save you from having to buy a new whole hose.
Universal connector for 5/8 and 3/4 inches hoses - this hose repair kit is designed basing on the inner diameter of the 16mm and 19mm hoses, such as garden hose, so it is great for the devices which accept 5/8 inches connection or 3/4 inches connection, water tap etc. Solid brass construction for durability and long service life - the hose connectors are made of solid brass which is more sturdy and durable than plastic or aluminum one. This is a professional hose repair kit for extending the service life of your hose.
Gardeningwill #ad - With barbed to stuck and seal the hose. Heavy-duty brass construction with rust proof. Standard 3/4" us thread garden hose connection, work with your gaden hose, nozzle, sprayers, etc. Include 3pcs brass hose mender, 6pcs stainless clamps.
1. YELUN
#adYELUN Solid Brass Garden Hose Repair Connector with Clamps Hose End Repair Kit ,Fit for 3/4"Garden Hose Fitting,Male and Female Hose Fittings3/4"-3 Set
#adThe product contains 3 pc male + 3 pc female garden hose repair kit, 6 pcs stainless tightening clamp， with 6 pcs free rubber gaskets. Note:1. Keep the water pipe incision flat.
More information #ad
Tighten stainless clamps as tightly as possible to prevent leakage. Good service: if you have any problem with this product, feel free to email or call us. We will replace it or give your money back for any reason. Standard 3/4" us thread garden hose connection, nozzle, sprayers, and our size is 19.95mm（0785 in），work with your gaden hose, etc.| Brand | YELUN #ad |
| Manufacturer | YELUN #ad |
| Weight | 270 Grams |
More information #ad
2. PLG
#adPLG Brass 3/4" Hose Repair Connector with Clamps, Male and Female Garden Hose End Repair Fittings 2 Set
#adWarm tip: the brass hose connector od is 19mm, some hoses will have a really snug fit and some others will be really hard to attach the coupler. If your garden hose id is 5/8-inch16mm, One easy way is to soak the end of the hose with boiling water.
More information #ad
Size: hose joint diameter is 19mm/074", work with 3/4" garden hose diameter is about 19. 1mm. Female connector diamteter is 1"/25. 4mm. Material:solid brass body and stainless steel clamps with rust proof, Heavy duty. Max flow:15. 5mm flow, standard 3/4" us thread garden hose connection, with extra gasket seal. You will need pliers! The boiling water will soften the hose and make installing the coupler much easier.| Brand | PLG #ad |
| Manufacturer | PLG #ad |
More information #ad
3. MaoFa
#ad3Sets Brass Garden Hose Mender End Repair Kit Water Hose End Mender with Stainless Steel Clamp,Female and Male Hose Connector 3/4
#adWith the stainless tightening clamp you can make it tightly as you want. Heavy-duty brass construction with rust proof. Standard 3/4" us thread garden hose connection, work with your gaden hose, sprayers, nozzle, etc.
More information #ad
If you have any problem with this product, feel free to email or call us. We will replace it or give your money back for any reason. It can be use garden hose mender, end hoses male mender, end hoses female mender, hose repair mender.3 male mender + 3 female mender + 6pcs stainless tightening clamp fit for 14-27mm out diameter hose. Stainless clamp width is 12mm.| Brand | MaoFa #ad |
| Manufacturer | MaoFa #ad |
More information #ad
4. Hotop
#ad4 Pieces 3/4 Inch Garden Hose Repair Mender Solid Brass Water Hose Connector Splicer Mender with 8 Pieces Stainless Steel Tightening Clamp and Seal Tape
#ad9 cm garden hose, please do pay attention to the size carefully before purchasing to make sure it's the right fitting for your hose. Easy installation: just install the hose end repair connector by hands without any tool, saving your time and energy; The tape is less sticky on the fingers and easy to remove, no more complicate process, just wrap the seal tape around the threaded male end of the pipe or connector and screw it in.
More information #ad
Wide applications: brass garden water hose end connector can be applied to 3/4 inch garden hose, etc. Sprayers, nozzle, which can meet your needs for fixing old or damaged hose; Stainless steel clamp can make the connection between garden hose mender and hose end as tightly as you want to avoid leakage, making things easier and saving water. Durable and sturdy: this garden hose repair connector is made of solid brass, corrosion resistance, durable to use with firm structure; The seal tape is made of teflon with nice sealing, both are rust and corrode resistant, the clamp is made of stainless steel, anti-aging. For 3/4 inch garden hose: the solid brass water hose mender is approx.
| Brand | Hotop #ad |
| Manufacturer | Hotop #ad |
| Part Number | Hotop-Hose Repair Mender-0158 |
More information #ad
5. Hotop
#ad4 Set 3/4 Inch Solid Brass Garden Hose Connector Hose Mender, Water Hose Repair Kit Female and Male Hose Connector with Tape, Stainless Steel Clamp and Rubber Gasket
#adInstall easily: our female male hose connectors, clamps and tapes are easy for you to install and operate, you can directly install them by hands, without any other complex tools; The practical clamps can help protect the pipe from leaking.
More information #ad
Nice combination tool: you will get 4 sets 3/4 inch solid brass garden hose mender, 8 pieces rubber gasket and 1 roll tape in our package, 8 pieces stainless steel clamps, which will satisfy your daily replace demands. Wide range to use: these 3/4 inch solid brass garden hose mender can be applied for most standard garden hose, as long as the size is fitting, faucets and watering devices, our hose mender tool sets will be your useful assistants when you repairing the broken pipe. Durable and sturdy: our water hose repair kits are made of solid brass, durable and not easy to rust, with firm structure, serving for a long time; The clamp is made of stainless steel, also not easy to break, giving you nice use process.
| Brand | Hotop #ad |
| Manufacturer | Hotop #ad |
| Weight | 0.44 Pounds |
| Part Number | Hotop-Garden Hose Mender-0148 |
More information #ad
6. PLG
#adPLG Solid Brass 3/4 Inch Garden Hose Repair Kit Male and Female Hose End Repair Water Hose Fittings Connector with Stainless Steel Clamp
#adPackage included 1 set/2pcs male and female hose connector and clamps. Can be used as hose repair, hose end connect and hose mender. Warm tip: the brass hose connector od is 19mm, some hoses will have a really snug fit and some others will be really hard to attach the coupler.
More information #ad
Max flow:15. 5mm flow, standard 3/4" us thread garden hose connection, with extra gasket seal. If your garden hose id is 5/8-inch16mm, One easy way is to soak the end of the hose with boiling water. You will need pliers! The boiling water will soften the hose and make installing the coupler much easier. Be very careful as both the hose and the coupler will be too hot to touch.| Brand | PLG #ad |
| Manufacturer | PLG Air Tools #ad |
| Weight | 0.22 Pounds |
| Part Number | 19mm-FM |
| Model | 19mm-FM |
More information #ad
7. Hotop
#ad3 Sets 3/4 Inch Brass Garden Hose Repair Kit Mender End Water Hose End Mender Female and Male Hose Connector with 6 Pieces Stainless Steel Clamp
#adMore information #ad
Package including: you will get 3 sets 3/4 inch brass garden hose mender and 6 pieces stainless steel clamp, enough for your daily use or replacement, nice combination for your convenience. 17 mm/ 067 inches, can easy to connect the 3/4 inch hose for easily insert and remove hoses, please check your hose size before buy it. Size details: the diameter of brass garden hose mender is approx. Wide applications: you can use them to repair or replace broken female or male hose connector, connect to male or female quick connector to lengthen the hose, use with water faucet, etc.
| Brand | Hotop #ad |
| Manufacturer | Hotop #ad |
More information #ad
8. Sanpaint
#adZinc and Brass Female Clamp Coupling,Fits 3/4" or 5/8" Garden Hose Repair Fitting
#adMore information #ad
Made with precision process, no leaking and durable, reusable and easy to install. Brass female coupling, Zinc clamp and stainless steel screws.| Brand | Sanpaint #ad |
| Manufacturer | REGNHLIF #ad |
| Height | 1.18 Inches |
| Length | 1.97 Inches |
| Weight | 50 Grams |
| Width | 1.18 Inches |
More information #ad
9. STYDDI
#adSTYDDI Garden Hose Repair Kit, Solid Brass Water Hose Mender Female and Male Hose Connector with Clamps, 4 Set, Fit All 5/8" and 3/4" Rubber Garden Hose
#adAll the products included in this kit is reusable - this hose repair kit includes 4 solid brass Female connectors, 4 solid brass Male connectors, 8 stainless steel clamps and 8 gaskets. They are easy to connect and disconnect, and they could hold up for a long time. This kit could definitely save you from having to buy a new whole hose.
More information #ad
Repairing your hose can be done in about five minutes and making the hose work even better than before. Us standard 3/4" thread for a wide range of applications - the female thread adapter and male thread adapter are US standard 3/4" thread, hose splitter, garden hose, and suit for 3/4" standard threaded which has a wide range of applications such as outdoor faucet, nozzle, sprayer, timer, sprinkler, filter, etc. Universal connector for 5/8 and 3/4 inches hoses - this hose repair kit is designed basing on the inner diameter of the 16mm and 19mm hoses, such as garden hose, so it is great for the devices which accept 5/8 inches connection or 3/4 inches connection, water tap etc. Solid brass construction for durability and long service life - the hose connectors are made of solid brass which is more sturdy and durable than plastic or aluminum one. This is a professional hose repair kit for extending the service life of your hose.
| Brand | STYDDI #ad |
| Manufacturer | STYDDI #ad |
| Part Number | 20200418-HG49 |
More information #ad
10. Gardeningwill
#ad3Sets Brass 3/4" Garden Heavy Duty Hose Mender Repair End Replacement Male Female Connector with Stainless Clamp
#adMore information #ad
Pipe joint diameter is 19mm/074”, standard 3/4" is about 19. 1mm, thesse parts are a little smaller than stand size which make it easy to insert or pull out 3/4” hose. It can be use garden hose mender, end hoses male mender, end hoses female mender.| Brand | Gardeningwill #ad |
| Manufacturer | GardeningWill #ad |
| Height | 4.7 Inches |
| Length | 1.5 Inches |
| Weight | 0.84 Pounds |
| Width | 2 Inches |
| Part Number | 43235-21872 |
| Model | 43235-21872 |
More information #ad
