As an Amazon Associate I earn from qualifying purchases.
Sparkfire #ad - Fits most tubing 1/2 inch: these 16mm drip irrigation fittings fit most brands of 1/2 inch irrigation tubing 16mm. 520-. 540" id. Notes: before buying, you'd better measure the tubing and hose inner diameter.
If you have problem about our item, pl feel free to contact us. Our drip irrigation barbed connectors are made of environmentally friendly anti-aging UV resistant high-impact plastic.
Simply push the tubing firmly over the barbs for a very tight fit that won't leak. Easy to install: irrigation hose connector is safe and simple to install without glue, tools, or clamps. Make sure the size and accessories are suitable. Save time and build your complete drip irrigation system at once.
FULAIERGD #ad - Operating pressure: up to 45 psi, 1/2" Tube can be divided into 1/4" Tubes. Pack:10pcs, high quality hard plastic fitting. Fits for drip irrigation fittings for pipes with an inner diameter of 1/2 inch and an outer diameter of 06-063” 16 mm tubing。.
One Stop Outdoor #ad - Fits all major brands of tubing 1/2", 16mm - Approximately. 520 id range. High impact Plastic Construction. Secure and easy installation without glue, tools, or clamps.
Please note* - to prevent leaks or blowouts please ensure that the incoming pressure does not exceed 30PSI. These fittings are designed to fit 1/2" Inch, 16mm drip tubing. 520 id, if the tubing you are using is larger it can cause leaks! 99% of all leaks and blowouts are caused by pressure issues or tubing size issues.
JOYPRO #ad - Perfect match 1/2 inch irrigation tubingjoypro 1/2 inch irrigation tee fittings can connect to most of the standard 1/2" drip irrigation tubing from 0560 to 0600 inside Diameter ID. Package listit comes with 24 pieces barbed tee connectors, which let you connect your irrigation systems as you wish.
Made of durable plastic materialjorpro drip line tees are made of high quality engineering plastics, water resistant, strong, so our irrigation tee connectors are durable, chemical-resistant and long-lasting than others.
Wide applicationthese tee fittings for 1/2 inch sprinkler hose is ideal for garden, flower bed, lawn, greenhouse, farm, patio and other agricultural watering system. Note: please check the size of tubing carefully before purchasing. Easy to installit is easy to install without any glue, tools or clamps.
iMopo #ad - Simple installation without glue, or clamps, securely connected, tools, not easy to fall off . Save your time to build a drip irrigation system with a leak-proof connection.
These 17mm barbed connectors work with half inch drip tubing from 0560 to 0600 inside Diameter ID. Reliable material: these barbed fittings are made of durable plastic, durable and reliable material to assure a long life using time.
iRunning #ad - Easy to installit is easy to install without any glue, tools or clamps. Made of durable plastic materialthe drip line tees are made of high quality engineering plastics, water resistant, strong, so our irrigation tee connectors are durable, chemical-resistant and long-lasting than others.
Package listit comes with 18 pieces barbed tee connectors, which let you connect your irrigation systems as you wish.
Note: please check the size of tubing carefully before purchasing. Perfect match 1/2 inch irrigation tubingthese 1/2 inch irrigation tee fittings can connect to most of the standard 1/2" drip irrigation tubing from 0560 to 0600 inside Diameter ID.
Kalolary #ad - It is durable. Application : ideal for use with raised garden beds, farm, residential, lawn，greenhouse gardening and agricultural watering applications.
One 1/2" tube can be divided into four 1/4" Tubes. For use with drip distribution Tubing, Drip Bubbler Tubing and emitter line. Operating pressure: up to 45 psi, 8pcs per bag. Anti-drop design: secure and easy installation.
Jayee #ad - Wide application：this 1/2 inch irrigation tubing fitting helps to build a maintenance-free irrigation system, flower bed, greenhouse, it is Ideal to use for garden, patio and agricultural watering applications.
Fits 1/2 inch irrigation tubing：outer diameter: approx. 17mm/067", inner diameter: approx. 102mm/04". These 17mm barbed tees are compatible with Rainbird, Orbit and other 1/2 inch drip tubing. Package included：it includes 25 pcs of 1/2”drip irrigation tubing tees in total.
1. Sparkfire
#adTees, Couplings, End Cap Plugs Irrigation Water Hose Connector, Sparkfire 42Pcs Drip Irrigation Fittings Kit Irrigation Barbed Connectors for 1/2" Tubing Switch Valves, End Closures, Elbows
#adIf you have problem about our item, pl feel free to contact us. Our drip irrigation barbed connectors are made of environmentally friendly anti-aging UV resistant high-impact plastic.
More information #ad
Ideal for garden greenhouse, flower Bed, patio, lawn, etc. It is sturdy and will last for a long time. The irrigation fittings kit includes 2 switch valves, 8 End Cap Plugs, 8 couplings, 8 tees, 8 elbows, 8x End Closures. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. Easy to install: irrigation hose connector is safe and simple to install without glue, tools, or clamps. Make sure the size and accessories are suitable. Save time and build your complete drip irrigation system at once.
| Brand | Sparkfire #ad |
| Manufacturer | yaxing #ad |
| Height | 1.18 Inches |
| Length | 1.57 Inches |
| Width | 1.18 Inches |
More information #ad
2. FULAIERGD
#adFULAIERGD 10 Pcs Barbed Tee 1/2 inch Tubing 1/2" ID x0.6-0.63" OD 16mm to 1/4 inch Irrigation Tube Anti-Drop Quality Fitting Fits 13mm ID / 4mm ID
#adMore information #ad
Lock the tube with srew caps. Dropproof design: secure and easy installation. For use with drip distribution Tubing, Drip Bubbler Tubing and emitter line. Press the barb tee into tubing.| Brand | FULAIERGD #ad |
| Manufacturer | FULAIERGD #ad |
| Weight | 0.61 Pounds |
More information #ad
3. One Stop Outdoor
#adBarbed Connectors Fits Most Brands, Irrigation Fittings Tee for 1/2" Drip Tubing, Rain Bird 16mm .520 ID and Compatible Drip or Sprinkler Systems Tee 20-Pack, One Stop Outdoor 20-Pack
#adPlease note* - to prevent leaks or blowouts please ensure that the incoming pressure does not exceed 30PSI. These fittings are designed to fit 1/2" Inch, 16mm drip tubing. 520 id, if the tubing you are using is larger it can cause leaks! 99% of all leaks and blowouts are caused by pressure issues or tubing size issues.
More information #ad
If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. 20-piece tees - three-way connector. Simple to install. Easy install - use these durable irrigation fittings to your connect 1/2" drip irrigation tubing.| Brand | One Stop Outdoor #ad |
| Manufacturer | One Stop Outdoor #ad |
More information #ad
4. JOYPRO
#adDrip Tees 17mm Irrigation Tubing Connectors for Drip Sprinkler Garden Lawn Systems, JOYPRO 24 Pieces Drip Irrigation Barbed Tee Fittings for 1/2” Tubing 0.600”ID
#adMade of durable plastic materialjorpro drip line tees are made of high quality engineering plastics, water resistant, strong, so our irrigation tee connectors are durable, chemical-resistant and long-lasting than others.
More information #ad
Directly insert this irrigation tubing tee at the ends of the water pipe, the barbed ends can grab 1/2" tubing tightly for a secure leak-proof connection. Wide applicationthese tee fittings for 1/2 inch sprinkler hose is ideal for garden, flower bed, lawn, greenhouse, farm, patio and other agricultural watering system. Note: please check the size of tubing carefully before purchasing. Easy to installit is easy to install without any glue, tools or clamps.
| Brand | JOYPRO #ad |
| Manufacturer | iRunning #ad |
More information #ad
5. iMopo
#adBarbed Connectors for 1/2" Drip Tubing, iMopo 21-Pack Drip Irrigation Universal Barbed Tee Fitting
#adThese 17mm barbed connectors work with half inch drip tubing from 0560 to 0600 inside Diameter ID. Reliable material: these barbed fittings are made of durable plastic, durable and reliable material to assure a long life using time.
More information #ad
Compatible with many types of Rainbird, Orbit, Dig and Toro tubing or drip lines. Good choice for use with raised garden beds, farm, greenhouse gardening and agricultural watering applications. Includes 21 barbed tees in total, Use these durable irrigation fittings to building a maintenance-free drip system.| Brand | iMopo #ad |
| Manufacturer | iMopo #ad |
More information #ad
6. iRunning
#adBarbed Tee Connectors for 1/2 Inch Irrigation Tubing 0.600" ID, Drip Line Tees for Drip Sprinkler Garden Lawn Systems, iRunning 18 Pieces Drip Irrigation 1/2" Tubing Tee Fittings 17mm
#adPackage listit comes with 18 pieces barbed tee connectors, which let you connect your irrigation systems as you wish.
More information #ad
Directly insert this irrigation tubing tee at the ends of the water pipe, the barbed ends can grab 1/2" tubing tightly for a secure leak-proof connection. Wide applicationthese tee fittings for 1/2 inch sprinkler hose is ideal for garden, farm, greenhouse, flower bed, lawn, patio and other agricultural watering system. Note: please check the size of tubing carefully before purchasing. Perfect match 1/2 inch irrigation tubingthese 1/2 inch irrigation tee fittings can connect to most of the standard 1/2" drip irrigation tubing from 0560 to 0600 inside Diameter ID.
| Brand | iRunning #ad |
| Manufacturer | iRunning #ad |
| Part Number | PD-17488 |
More information #ad
7. One Stop Outdoor
#adFits All Brands 16-17mm Drip Tape AG Tubing 10, Tee, One Stop Outdoor 10-Pack Drip Irrigation 3-Way Tee 1/2" Universal Perma Connector Barbed Locking Fitting for Drip Tubing
#adOne Stop Outdoor #ad - Incoming pressure: 30 PSI. Use: 3 way tee fitting - connect and configure drip irrigation tubing to your desired layout. Universal fit: fits all brands 16 & 17mm Drip Tubing! Material: constructed of highly durable UV and chemical-resistant materials to assure long life.More information #ad
Allows creation of a custom layout for your planting area. Locking fit: barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time! .| Brand | One Stop Outdoor #ad |
| Manufacturer | One Stop Outdoor #ad |
| Height | 3 Inches |
| Length | 5 Inches |
| Width | 6.5 Inches |
More information #ad
8. Rain Bird
#adRain Bird EFT25-1PS Drip Irrigation Easy Fit Universal Tee, Fits All 1/2" and 5/8" Tubing
#adRain Bird #ad - Compatible with all 1/2" drip irrigation tubing measuring from. 580" to. 700" outside diameter. Universal tee fitting quickly connects three lengths of 1/2" Drip tubing in a "T" shape.More information #ad
Constructed of highly durable UV and chemical-resistant materials to assure long life. Recommended operating pressure: 0 to 60 psi. Quick easy Fit push-together assembly speeds installation. Requires 50% less force than competitor’s compression fittings.| Brand | Rain Bird #ad |
| Manufacturer | Rain Bird #ad |
| Height | 16.88 Inches |
| Length | 5.5 Inches |
| Weight | 0.1 Pounds |
| Width | 6.25 Inches |
| Part Number | EFT25-1PS |
| Model | EFT25-1PS |
More information #ad
9. Kalolary
#adKalolary 10PCS Barbed Tee 1/2 inch to 1/4 inch Irrigation Tube Anti-Drop Premiun Quality Fitting fits 13mm ID/ 4mm ID, 16mm PE Pipe Lock Female Connector to 47 Pipe Variable Diameter Six-Way Adapter
#adOne 1/2" tube can be divided into four 1/4" Tubes. For use with drip distribution Tubing, Drip Bubbler Tubing and emitter line. Operating pressure: up to 45 psi, 8pcs per bag. Anti-drop design: secure and easy installation.
More information #ad
Press the barb tee into tubing. Lock the tube with srew caps. High quality: high quality hard plastic fitting, recyle material. Our barbed tee is made of high-quality plastic, We increased the wall thickness. Suitable for most brands 1/2" size tubing and 1/4" drip line. 51 id to. 15 id. Product includes: comes with 10pcs in a bag.| Brand | Kalolary #ad |
| Manufacturer | Kalolary #ad |
| Part Number | Kalolary |
More information #ad
10. Jayee
#adJayee 25 Pack Drip Irrigation Barbed Tee Fittings 17mm for 1/2" Drip Hose0.600”ID ，Sprinkler Tubing Connector for Drip System
#adFits 1/2 inch irrigation tubing：outer diameter: approx. 17mm/067", inner diameter: approx. 102mm/04". These 17mm barbed tees are compatible with Rainbird, Orbit and other 1/2 inch drip tubing. Package included：it includes 25 pcs of 1/2”drip irrigation tubing tees in total.
More information #ad
Durable plastic material：made of high-impact and high-strength plastic material, this 1/2 inch barbed tee assures more durable life. Tips: heat the end of hose to help it slide on this coupling. Easy installation：simply push this tubing connector can connect it with tubing firmly and its barbed design makes NO LEAKS possible.| Brand | Jayee #ad |
| Manufacturer | Jayee #ad |
More information #ad
